Compaq 370 User Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
Installing the Right-Lower Mounting Plate
Complete the procedure in Table 4 or Table 5 to install the right-lower mounting plate in the cabinet. Refer to Figure 2 as
necessary for clarity.
Figure 2 Installing the Right-Lower Mounting Plate (RETMA Cabinet Example)
Table 3 Metric: Left-Lower Mounting Plate Installation Procedure
1. Install four clip U-nuts (C
ALLOUT
2) on the rear leg of the left-front cabinet rail (C
ALLOUT
1), using vertical rail hole numbers 3,
9, 16, and 25.
2. Holding the left mounting plate (C
ALLOUT
3), align the rear column of dimpled holes on the mounting plate (as represented in
Figure 1) with the clip U-nuts (C
ALLOUT
2) installed in step 1 and install four 10-32 x 5/8 in pan head screws (C
ALLOUT
4)
finger-tight in these locations. DO NOT tighten the these screws at this time.
3. On the front leg of the left-front cabinet rail (C
ALLOUT
1), install two 10-32 x 1/2 in flat head screws (C
ALLOUT
6), using
vertical rail holes 9 and 24, and fully tighten.
4. Fully tighten all remaining screws installed in step 2.
5. Install three 10-32 x 5/8 in pan head screws (C
ALLOUT
5) in the front leg of the left-front cabinet rail (C
ALLOUT
1), using
vertical rail holes 2, 16, and 30, and fully tighten these screws.
Figure C
ALLOUTS
Legend
1. Clip U-nut (5X)
2. Right mounting plate
3. 10-32 x 5/8 in pan head screw (5X)
4. 10-32 x 5/8 in pan head screw (3X)
5. 10-32 x 1/2 in flat head screw (2X)
Table 4 RETMA: Right-Lower Mounting Plate Installation Procedure
1. Install five clip U-nuts (C
ALLOUT
1) on the rear leg of the right-front cabinet rail, using vertical rail hole numbers 18, 30, 42, 53,
and 65.
2. Holding the right mounting plate (C
ALLOUT
2), align the front column of dimpled holes on the mounting plate (as shown in
Figure 2) with the clip U-nuts (C
ALLOUT
1) installed in step 1 and install five 10-32 x 5/8 in pan head screws (C
ALLOUT
3)
finger-tight in these locations. DO NOT tighten the these screws at this time.
CXO6592B
4
4
4
5
5
2
3
1
Page view 3
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments