Compaq System/E25 User's Guide download pdf (Page 100)

100 Troubleshooting

Interpreting Status Values

SAM and STM report status in common terms, which are defined as follows:

Enclosure ID The unique manufacturer number that

distinguishes the reporting LCC from all other

LCCs.

WW Name (node) The World Wide Name assigned to this disk

system. In normal operation, this value is the same

as the World Wide Name (port) for LCC A.

WW Name (port) The World Wide Name of the reporting LCC.

Firmware Rev. The current firmware version on the reporting

LCC.

Power Supply Status The status of the left (Supply A) and right (Supply

B) power supplies in the selected disk system.

Possible values are OK, critical, not installed, or

not available.

Voltage Sensors

Voltage and Status

The voltage detected and status of three voltage

sensors—3.3V, 5.0V, and 12V—on each LCC.

Possible status values are OK, critical, noncritical,

not installed, unknown, and not available.

Temp Sensors

Temperature and Status

The temperature detected and status of four

sensors. Possible status values are OK, critical,

noncritical, not installed, unknown, or not

available.

Table 12. Status Indications

Reported

Status

Applicable

Component

Indication

OK All replaceable

components and

sensors

Component is installed and no error

conditions are known.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 143 144

No comments

Compaq System/E25 User's Guide Page 100