Compaq Wireless LAN 100 Specifications download pdf (Page 52)

Lift the right side of the cover, swing it up and to the left, and remove the cover.

4. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The

white WLAN antenna cable is connected to the WLAN module “Aux” terminal.

5. Remove the two Phillips PM2.5×4.0 screws (2) that secure the WLAN module to the computer. (The

edge of the module opposite the slot rises away from the computer.)

6. Remove the WLAN module (3) by pulling the module away from the slot at an angle.

NOTE: WLAN modules are designed with a notch (4) to prevent incorrect installation.

Reverse this procedure to install the WLAN module.

44 Chapter 4 Removal and replacement procedures

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 148 149

No comments

Compaq Wireless LAN 100 Specifications Page 52