Compaq 380 Specifications download pdf (Page 13)

Chapter 2

Removal and Replacement Procedures

This chapter provides subassembly/module-level removal and replacement procedures for

ProLiant DL380 Generation 2 servers. After completing all necessary removal and replacement

procedures, run the Diagnostics program to verify that all components operate properly.

You need the following items for some procedures:

■ Torx T-15 screwdriver

■ Diagnostics Utility from the Compaq SmartStart™ for Servers CD

Safety Considerations

Before performing service procedures, review the following safety information.

Electrostatic Discharge

A discharge of static electricity can damage static-sensitive devices or microcircuitry. Proper

packaging and grounding techniques are necessary to prevent damage. To prevent electrostatic

damage, observe the following precautions:

■ Transport products in static-safe containers such as conductive tubes, bags, or boxes.

■ Keep electrostatic-sensitive parts in their containers until they arrive at static-free stations.

■ Cover workstations with approved static-dissipating material. Use a wrist strap connected

to the work surface and properly grounded tools and equipment.

■ Keep the work area free of nonconductive materials such as ordinary plastic assembly aids

and foam packing.

■ Always be properly grounded when touching a static-sensitive component or assembly.

■ Avoid touching pins, leads, or circuitry.

■ Always place drives PCB assembly-side down.

■ Use conductive field service tools.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 120 121

No comments

Compaq 380 Specifications Page 13