Compaq AlphaServer ES40 Specifications download pdf (Page 35)

Operation 2-3

2.2

Power-Up Displays

Power-up information is displayed on the operator control panel and

on the console terminal startup screen. Messages sent from the SROM

(serial read-only memory) program are displayed first, followed by

messages from the SRM console.

NOTE: The power-up text that is displayed on the screen depends on what kind

of terminal is connected as the console terminal: VT or VGA.

If the SRM console environment variable is set to serial, the entire

power-up display, consisting of the SROM and SRM power-up

messages, is displayed on the VT terminal screen. If console is set to

graphics, no SROM messages are displayed, and the SRM messages

are delayed until VGA initialization has been completed.

•

Section 2.2.1 shows the SROM power-up messages and corresponding

operator control panel (OCP) messages.

•

Section 2.2.2 shows the messages that are displayed once the SROM has

transferred control to the SRM console.

•

For a complete list of messages displayed on the OCP, see Chapter 7.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 239 240

No comments

Compaq AlphaServer ES40 Specifications Page 35