Compaq 5600 - TFT RKM User's Guide download pdf (Page 47)

Care and Maintenance

HP TFT5600 Rackmount Keyboard and Monitor (RKM) 4-3

HP CONFIDENTIAL

Writer: Amy Laffitte File Name: e-ch4 Care and Maintenance

Codename: RUGER Part Number: 229719-003 Last Saved On: 8/11/02 11:11 PM

Moving the TFT5600 RKM Installed in a Rack

When moving the TFT5600 RKM installed in a rack, it is recommended to install the

lock plates, included in your kit, on each side of the unit and rack.

To install the lock plates:

1. Fully extend the sliding rails until they lock.

2. Place the lock plate behind the corner of the front plastic bezel, making sure the

top and bottom holes are aligned with the pins.

3. Insert one 6-32 screw (1) into the middle hole on the lock plate, securing it to the

unit.

4. Insert one M-6 screw (2) to the other end of the lock plate, securing the unit to

the rack.

5. Repeat steps 2 through 4 to install the other lock plate.

Figure 4-1: Installing lock plates

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 62 63

No comments

Compaq 5600 - TFT RKM User's Guide Page 47