Compaq 1200 Specifications download pdf (Page 38)

United States January 3, 2003

Maintenance & Service Guide

Presario 1200 Series

Models: 1230 and 1232

Illustrated Parts Catalog | Removal & Replacement Procedures | Specifications

Pin Assignments | Battery Pack Operations

Service Considerations

Listed below are some of the considerations that you should keep in mind

during the disassembly and assembly of the computer.

Tool and Software Requirements

To service the computer, you need the following:

● Compaq screwdriver kit (Spare Part No. 161946-001)

● Torx T-9 screwdriver

● 3/16-inch and 5mm nut drivers (for screwlocks and standoffs)

● Small, standard screwdriver

● Small, Phillips screwdriver

● Diagnostics software

Screws

The screws used in the computer are not interchangeable. If an incorrect

screw is used during the reassembly process, it can damage the unit. Compaq

strongly recommends that all screws removed during disassembly be kept

with the part that was removed, then returned to their proper locations.

IMPORTANT:

As each subassembly is removed from the computer, it should

be placed away from the work area to prevent damage.

Return to Removal & Replacement Procedures

privacy statement

legal notices

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 80 81

No comments

Compaq 1200 Specifications Page 38