
Multi-Platform Sun StorEdge™ network
FC switch-8 and switch-16 Guide
This document provides guidelines for use of the Sun network FC switch-8 and switch-16 in third-party operating
environments. Topics include:
■ Installation Overview
■ Related Documentation
■ Supportability Specifications
■ Configuration Guidelines
Installation Overview
For third-party operating environments, install the switch with the Sun StorEdge™ T3 array and the Multi-Platform
Failover Driver (Sun StorEdge Multipath Configurator).
▼ To Operate the Switch in a Third-Party Operating Environment
1. Install your Sun StorEdge T3 arrays.
Refer to the Sun StorEdge T3 Disk Tray Installation, Operation, and Service Manual to install and operate the Sun
StorEdge T3 array.
2. Install the Sun Multi-Path Failover Driver on your host.
Refer to the failover driver documentation for your operating environment. See
TABLE 1 for a list of available
documents.
3. Install the Sun network FC switch-8 or switch-16.
Refer to the Sun StorEdge network FC switch-8 and switch-16 Installation and Configuration Guide to understand the
basics of how to install the Sun switch. Although the manual is specific to installation in the Solaris environment, it
provides the essential overview for installing the hardware.
Note – You might need to modify commands for some of the switch activation procedures found in the Sun StorEdge
network FC switch-8 and switch-16 Installation and Configuration Guide so they comply with your operating environment
requirements. See your third-party documentation for further information on how to do this.
Comments to this Manuals