Compaq Evo Workstation w8000 Specifications download pdf (Page 83)

USB-to-MIDI Software Installation

2. Move the sliders on the fader controller and confirm that the MIDI IN

LED indicator on the USB-to-MIDI converter turns on and off

appropriately.

The USB LED indicator pulses — this is expected behavior.

3. Start the NewsCutter application and choose Audio Gain from the

Tools menu.

The indicator lights on the Audio Gain tool should change to blue.

4. If the lights do not change to blue, perform the following steps:

a. Choose Console from the Tools menu.

b. Locate the following lines in the Console window:

Midi In device: In-A USB MidiSPORT 2x2

Midi Out device: Out-A USB MidiSPORT 2x2

c. Check that the MIDI connections on the MIDISPORT 2x2

USB-to-MIDI converter match the connections listed in the

Console window (either A or B).

d. If necessary, quit the NewsCutter application, switch the MIDI

cables to match the output in the Console window, and then restart

the application.

e. If the indicator lights are still not blue, recheck the connections

according to the instructions in the setup guide.

5. Choose Calibrate Hardware Sliders from the Audio Gain tool Fast

menu.

The Record Status light changes to yellow.

6. Move the sliders on the external fader. The corresponding sliders move

in the Audio Gain tool.

Now you are ready to use the fader controller with the Avid application

software. For more information, see the Avid NewsCutter User’s Guide or

Help.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 101 102

No comments

Compaq Evo Workstation w8000 Specifications Page 83