Compaq Evo D300v Series User Manual download pdf (Page 12)

Hardware Upgrades

Installation Sequence

It is very important that you follow this sequence of steps to ensure

the proper installation of any optional equipment.

For more information about Setup Utility/Computer Setup, refer to

the appropriate Setup Utility chapter in this guide.

1. If the computer is already on, turn it off and disconnect the power

cord from the wall outlet.

WARNING: To reduce the risk of personal injury from electrical shock

and/or hot surfaces, be sure to disconnect the power cord from the wall

outlet, and allow the internal system components to cool before touching.

WARNING: To reduce the risk of electrical shock, fire, or damage to the

equipment, do not plug telecommunications or telephone connectors into the

network interface controller (NIC) receptacles.

CAUTION: Static electricity can damage the electronic components of the

computer or optional equipment. Before beginning these procedures, ensure

that you are discharged of static electricity by briefly touching a grounded

metal object. See Appendix C, “Electrostatic Discharge,” for more

information.

2. Open the computer by removing its access panels. See the

procedures for removing the computer access panels later in this

chapter.

3. Install any optional equipment. See the applicable sections of this

guide or refer to the documentation provided with the optional

equipment for instructions.

Compaq Evo D300 User’s Guide 2-1

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 70 71

No comments

Compaq Evo D300v Series User Manual Page 12