Compaq Evo D300v Series User Manual download pdf (Page 34)

Setup Utility (Intel Pentium 4 Models)

Change Supervisor Password Screen

The Change Supervisor Password screen is used to change the

supervisor password. The default setting is no password. Once a

password is set, a user must enter the password to change parameters

using the Setup Utility.

Enter the new supervisor password in the dialog box, and then press

the

Enter key.

To remove or disable the set password, enter the current password,

then press

Enter when prompted to enter a new password.

Clearing CMOS clears the Power-On Password. It does NOT clear

the Supervisor Password.

You can configure the system to use the same password for both

power up and Setup utility entry. To do this, use the Advanced

CMOS Setup menu option, highlight Password Check, and then

select the Always option.

Clearing passwords clears both the Supervisor and Power-On

Passwords, but does not clear the Always option. To reset only the

Supervisor Password, change Always to Setup on the Available

Options list.

Auto Configuration with Optimal Settings Screen

The Auto Configuration with Optimal Settings screen is used to load

configuration settings that give the highest performance to the

system. The system is shipped with these settings as the default. Use

this option to return the system to optimal performance.

To load the high performance configuration settings, choose Y when

prompted by the dialog box, and then press the

Enter key.

3-10 Compaq Evo D300v User’s Guide

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 70 71

No comments

Compaq Evo D300v Series User Manual Page 34