Compaq 6735s - Notebook PC Specifications download pdf (Page 64)

Before removing the WLAN module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the

computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and

then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 50).

Remove the WLAN module:

1. Position the computer with the front toward you.

2. Loosen the Phillips PM2.5×6.0 captive screw (1) that secures the WLAN module compartment

cover to the computer.

3. Lift the right side of the WLAN module compartment cover (2), swing it to the left, and remove the

cover. The WLAN module compartment cover is included in the Plastics Kit, spare part numbers

491253-001 (for use only with HP Compaq 6730s Notebook PC models) and 491616-001 (for use

only with HP Compaq 6735s Notebook PC models.

4. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.

NOTE: The black WLAN antenna cable is connected to the WLAN module “Main” terminal. The

white WLAN antenna cable is connected to the WLAN module “Aux” terminal.

5. Remove the two Phillips PM2.5×4.0 screws (2) that secure the WLAN module to the computer.

(The edge of the module opposite the slot rises away from the computer.)

56 Chapter 4 Removal and replacement procedures

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 170 171

No comments

Compaq 6735s - Notebook PC Specifications Page 64