Compaq 1200 User's Guide download pdf (Page 200)

6-6 User’s Guide

4. To terminate the modem connection, enter the RCM hangup command.

RCM> hangup

If the modem connection is terminated without using the hangup command or if

the line is dropped due to phone-line problems, the RCM will detect carrier loss

and initiate an internal hangup command. If the modem link is idle for more

than 20 minutes, the RCM initiates an auto hangup.

NOTE: Auto hangup can take a minute or more, and the local terminal is

locked out until the auto hangup is completed.

6.2.3 Using RCM Locally

Use the default escape sequence to invoke the RCM mode locally for the first time.

You can invoke RCM from the SRM console, the operating system, or an

application. The RCM quit command reconnects the terminal to the system console

port.

1. To invoke the RCM locally, type the RCM escape sequence. See

in Example

6–2 for the default sequence.

The escape sequence is not echoed on the terminal or sent to the system. At the

RCM> prompt, you can enter RCM commands.

2. To exit RCM and reconnect to the system console port, enter the quit command.

(see

). Press Return to get a prompt from the operating system or system

console.

Example 6–2 Invoking and Leaving RCM Locally

P00>>> ^]^]rcm

RCM>

RCM> quit

Focus returned to COM port

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 255 256

No comments

Compaq 1200 User's Guide Page 200