4-24 AlphaServer DS20 User’s Guide
4.7
Testing the System
The test command runs firmware diagnostics for components of the system. This
command is used to test Windows NT systems as well as DIGITAL UNIX and
OpenVMS systems.
Example 4–14 Test Command
P00>>> test
System test, runtime 1200 seconds
Type ^C if you wish to abort testing once it has started
Default zone extended at the expense of memzone.
Use INIT before booting
Testing Ethernet device(s)
Testing VGA
Testing Memory
Testing IDE/ATAPI disks (read-only)
Testing SCSI disks (read-only)
Testing floppy drive (dva0, read-only)
Test time has expired...
System test complete
P00>>>
Comments to this Manuals