Compaq AlphaServer DS20 User's Guide download pdf (Page 193)

Managing the System Remotely 6-5

To terminate the modem connection, enter the RCM hangup command.

RCM> hangup

If the modem connection is terminated without using the hangup command or if the

line is dropped due to phone-line problems, the RCM will detect carrier loss and

initiate an internal hangup command. If the modem link is idle for more than 20

minutes, the RCM initiates an auto hangup.

NOTE: Auto hangup can take a minute or more, and the local terminal is locked out

until the auto hangup is completed.

6.2.2 Using RCM Locally or with a Modem On COM1

Use the default escape sequence to invoke the RCM mode locally for the first time.

You can invoke RCM from the SRM console, the operating system, or an

application. The RCM quit command reconnects the terminal to the system console

port.

To invoke the RCM locally, type the RCM escape sequence. See

➊ in Example

6–2 for the default sequence.

The escape sequence is not echoed on the terminal or sent to the system. At the

RCM> prompt, you can enter RCM commands.

To exit RCM and reconnect to the system console port, enter the quit command

(see

➋). Press Return to get a prompt from the operating system or system

console.

Example 6–2 Invoking and Leaving RCM Locally

P00>>> ^]^]rcm ➊

RCM>

RCM> quit

➋

Focus returned to COM port

1 2 ... 188 189 190 191 192 193 194 195 196 197 198 ... 235 236

No comments

Compaq AlphaServer DS20 User's Guide Page 193