Installing Components 7-9
3.
Unscrew the edge of the module that secures the module to the card cage.
4.
Grasp the edge of the module and gently but firmly pull it from the slot.
5.
Once the module is released, gently pull it out of the cage.
Installation
1.
Slide the CPU module into the CPU slot. Be sure the edges of the module are in
both guides so that it correctly lines up with the slot on the system board.
2.
Firmly press the module into the connector.
3.
Secure the module to the card cage frame with the two screws.
4.
Plug the power cord in.
Verification - DIGITAL UNIX and OpenVMS Systems
•
Issue the show cpu command to display the status of the new module.
Verification - Windows NT Systems
1.
Start AlphaBIOS Setup, select Display System Configuration, and press Enter.
2.
Using the arrow keys, select Systemboard Configuration to display the status of
the new module.
Figure 7–5 CPU Module Installation
IP00215A
Comments to this Manuals