Installing Components 7-11
Memory Option Installation
1.
Shut down the operating system and power down the system.
2.
Remove the top cover and left side panel.
3.
If necessary, remove either CPU to access the DIMM slots necessary for the
installation.
4.
Open each memory connector for the option by pushing the levers on the
connector ends outward. See Figure 7–6 for the locations of the connectors.
5.
Align each DIMM in the connector and press down to close the connector
levers.
Figure 7–7 Memory Card Installation
WARNING: CPU modules and memory modules have parts that operate at high
temperatures. Wait 2 minutes after power is removed before touching any module.
CAUTION: Wear an antistatic wrist strap when working on this system.
Comments to this Manuals