Compaq DS10 Operations Instructions download pdf (Page 149)

Remote Management Console 3-37

3.14.15 set alert

The set alert command sets the alert string that is transmitted

through the modem when an alert condition is detected.

Set the alert string to the phone number of the modem connected to the remote

system. The alert string is appended after the dial string, and the combined

string is sent to the modem.

The alert string cannot exceed 63 characters, and consists of the following

elements:

,,,,,, Each comma (,) provides a 2-second delay. In this example, a

delay of 12 seconds is set to allow the paging service to answer.

5085554444#

A call-back number for the paging service. The alert string

must be terminated by the pound (#) character.

;

A semicolon (;) must be used to terminate the entire string.

The example shown below is generic. Because paging services vary, be sure to

listen to the options provided by the paging service to determine the appropriate

delay and the menu options.

Syntax: set alert

Example:

RMC> set alert

alert> ,,,,,,,5085551212#;

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 181 182

No comments

Compaq DS10 Operations Instructions Page 149