Compaq DS10 Operations Instructions download pdf (Page 19)

Operations 1-7

Example 1–2 Power-Up Display - DS10L Serial and Graphics

Consoles

Note: There is only one PCI slot on the DS10L; its logical slot number is 17.

Serial Console

256 Meg of system memory ➊

probing hose 0, PCI

probing PCI-to-ISA bridge, bus 1

➋

bus 0, slot 9 -- ewa -- DE500-BA Network Controller

bus 0, slot 11 -- ewb -- DE500-BA Network Controller

bus 0, slot 13 -- dqa -- Acer Labs M1543C IDE

bus 0, slot 13 -- dqb -- Acer Labs M1543C IDE

bus 0,

➌ slot 17 -- dra -- Mylex DAC960

Testing the System

Testing the disks (read only)

Testing the Network

System Temperature is 36 degrees C

Initializing GCT/FRU at 1f6000

COMPAQ AlphaServer DS10L 466 MHz Console V5.7-0 Jan 14 2000 09:59:58

>>> ➍

➊

Memory size is determined.

➋

The PCI bridges and attendant buses (indicated as IODn by the console)

are probed and the devices are reported. I/O adapters are configured.

➌ The power-up logical slot is always 17 on the DS10L.

➍ The SRM console banner and prompt (>>>) are printed.

The SRM console is a command-line interface you use to set or read system

parameters.

If the auto_action environment variable is set to boot or restart and the

os_type environment variable is set to unix or openvms, the Tru64 UNIX

or OpenVMS operating system boots.

See Section 2.18 for information on environment variables. See Chapter 2

for SRM console and AlphaBIOS information.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 181 182

No comments

Compaq DS10 Operations Instructions Page 19