Compaq DS10 Operations Instructions download pdf (Page 45)

Operations 1-33

1.8.4 LFU Commands

The commands summarized in Table 1–4 are used to update

system firmware.

Table 1–4 LFU Command Summary

Command Function

display

Shows the physical configuration of the system.

exit

Terminates the LFU program.

help

Displays the LFU command list.

lfu

Restarts the LFU program.

list

Displays the inventory of update firmware on the selected device.

readme

Lists release notes for the LFU program.

update

Writes new firmware to the module.

verify

Reads the firmware from the module into memory and compares

it with the update firmware.

display

The display command shows the physical configuration of the system. Display

is equivalent to issuing the SRM console command show configuration.

Because it shows the slot for each module, display can help you identify the

location of a device.

exit

The exit command terminates the LFU program, causes system initialization

and testing, and returns the system to the console from which LFU was called.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 181 182

No comments

Compaq DS10 Operations Instructions Page 45