Compaq DS10 Operations Instructions download pdf (Page 98)

2-46 DS10 / DS10L Console Reference

• In firm bypass mode, you cannot enter RMC mode. To enter RMC mode

from firm bypass mode, reset the com1_mode variable from the SRM

console.

Syntax: set com1_mode value

where value can be:

snoop

soft_bypass

firm_bypass

Data partially bypasses RMC, but RMC taps into the data lines

and listens passively for the RMC escape sequence.

Data bypasses RMC, but RMC switches automatically into snoop

mode if an alert condition or loss of carrier occurs.

Data bypasses RMC. RMC is effectively disabled.

Example:

>>> set com1_mode

COM1_MODE (SNOOP, SOFT_BYPASS, FIRM_BYPASS)

2.18.6 console

The console terminal can be either a graphics monitor or a

serial terminal. The console environment variable specifies

which is used. Whenever you change the value of console, you

must reset the system by pressing the Halt/Reset button or

issuing the initialize command.

Syntax: set console output_device

where output_device can be:

graphics

(default)

The console terminal is a graphics monitor or a device connected

to the VGA or TGA module.

serial

The console terminal is the device connected to the COM1 port.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 181 182

No comments

Compaq DS10 Operations Instructions Page 98