Compaq Evo Workstation w8000 Specifications download pdf (Page 21)

Compaq W8000 System Overview

The system speed might increase without notice.

If you install dual microprocessors, NewsCutter Release 3.x will not

realize any performance gains from a second microprocessor; it is a

single-threaded application.

Memory Support

The memory used by the Compaq W8000 system has the following

requirements:

• 800-MHz, direct Rambus

inline memory modules (RIMM).

• Error correcting code (ECC) dynamic random access memory

(RDRAM).

• Avid has qualified the 128-MB and 256-MB RIMMs.

The memory modules must be installed in pairs of the same size.

• The memory modules are plugged into an eight-slot memory card. The

recommended memory for a NewsCutter system is 512 MB (256 MB

minimum).

See the hardware reference guide for the Compaq W8000 system for

instructions on how to install the RIMM memory. Purchase additional

memory through a local source based on the manufacturer’s

documentation.

Control and Status Indicators

Figure 1 shows the locations of the control and status indicators located on

the front of the Compaq W8000 system. Table 3 describes the function of

each control and status indicator.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 101 102

No comments

Compaq Evo Workstation w8000 Specifications Page 21