Compaq Evo Workstation w8000 Specifications download pdf (Page 49)

Installing Avid Boards

To install the Meridien digital media board set:

1. Turn off the system and unplug the power cord.

2. Put on an antistatic wrist strap and connect it to a metal ground point

on your system.

To avoid static damage to your circuit board, take the proper antistatic

precautions before handling the board.

3. Remove the cover according to the manufacturer’s documentation (if

not already done).

4. Install the Meridien digital media board set (see Table 5 on page 29).

5. Secure the Meridien digital media board set to the system.

Use any expansion slot blank panels you remove to cover any open slots

not used.

6. Attach one end of the cable to the edit display controller cable header

and the other end to the Meridien digital media board set cable header.

Align the cable in the connectors; each end of the cable is keyed for

proper installation.

Make sure the cable is firmly seated in the connector without forcing

an improper connection.

7. Continue with “Installing Optional Boards” on page 49. If you have no

optional boards to install, continue with “Reinstalling the Fan” on

page 54.

Installing Optional Boards

Optional boards you have purchased can now be installed. Optional boards

include:

• Ultra 160 LVD SCSI controller board

• Fibre Channel board playback device

The Compaq W8000 system has a built-in MIDI controller.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 101 102

No comments

Compaq Evo Workstation w8000 Specifications Page 49