Compaq Evo Workstation w8000 Specifications download pdf (Page 76)

Chapter 5 Installing and Verifying Avid System Software

7. When the Flash update is complete, you might see the following

message:

RAID has been enabled for your adapter(s).

Remember to Save Parameters when you exit.

Press Enter. The message disappears and you are returned to the

Adapters menu.

8. Press the Esc key.

The Adapters menu disappears and you are returned to the Main menu.

9. Remove the floppy disk from the floppy drive.

10. Use the arrow keys to select Save Parameters and Exit, and then press

Enter.

The changes are saved and the system automatically restarts.

Installing the ATTO Fibre Channel Driver

If you are using the ATTO Fibre Channel controller as standalone disk

storage, use the instructions in this document to install the Fibre Channel

driver. The Fibre Channel drives should be attached and turned on before

you install the driver. If you are using a Fibre Channel controller in

conjunction with Avid Unity MediaNetwork,

do not use the instructions in

this document to install the Fibre Channel driver. See the instructions in

the Avid Unity MediaNet Windows Client Setup Guide to install the new

driver.

To install the ATTO 3300 Fibre Channel driver:

1. Right-click the My Computer icon and select Manage.

The Computer Management window opens.

2. Click Device Manager.

3. Expand the Other Devices section by clicking the + (plus) sign.

A type of Fibre Channel controller is displayed.

4. Right-click the Fibre Channel controller, and select Properties.

The Fibre Channel Controller Properties window opens.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 101 102

No comments

Compaq Evo Workstation w8000 Specifications Page 76