Compaq Evo Workstation w8000 Specifications download pdf (Page 79)

Installing Optional Disk Controller Drivers

11. Click the Browse button and browse to:

My Computer\CD-ROM drive letter\Upgradedrivers

\Emulex Fibre Channel Driver

12. Select OEMSETUP.inf, and then click Open.

13. Click OK in the Update Device Driver Wizard.

14. Click Next.

The Digital Signature Not Found dialog box appears.

15. Click Yes.

The software installs (which might take a minute).

16. Click Finish, and then close the Emulex Properties window.

17. You might see a Welcome to Found New Hardware Wizard (depending

upon the hardware configuration) or a dialog box stating the system is

installing a utility. If not, continue to step 18.

Use the following procedure to step through the wizard and disable the

hardware. The utility is not needed and this stops the wizard from

appearing each time you boot the system.

To disable the hardware for the wizard:

a. Click Next in the Welcome to Found New Hardware Wizard.

The Install Hardware Devices Driver window opens.

b. Select “Search for a suitable driver for my device,” and then click

Next.

The Locate Driver Files dialog box appears.

c. Click Next.

The Driver Files Search Results window opens.

d. Select “Disable the device,” and then click Finish.

18. After you install the drivers for the Emulex controller, remove the Avid

application CD-ROM from the CD-ROM drive, and then restart the

system.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 101 102

No comments

Compaq Evo Workstation w8000 Specifications Page 79